Konica Minolta bizhub 501 - Manual (Page 146)

501/421/361 1-133
Setup items by operation 1
1.43.4 IEEE802.1X Authentication Setting
In the administrator mode of the PageScope Web Connection, select the [Network] tab - [IEEE802.1X
Authentication Setting]-[IEEE802.1X Authentication Setting] to make the following settings.
Item Definition Prior confirmation
Authentication Status The state of authentication is displayed.
•
Authenticated: Displayed when authenticated.
• Authenticating: Displayed when being authenticat-
ed.
• Disabled: Displayed when not authenticated.
• Authentication Failure: Displayed when authentica-
tion failed.
Pressing [Refresh] updates the current state of authen-
tication.
IEEE802.1X Authentication Set-
ting Select [ON].
User ID Enter a user ID (up to 128 alphanumeric characters).
The user ID is used by all of the EAP-Types.
Password Enter a password (up to 128 alphanumeric characters).
The password is used by EAP-Type other than [EAP-
TLS].
EAP-Type Select the EAP authentication method.
When [Depend on Server] is selected, authentication is
made by EAP-Type provided by the authentication
server.
In compliance with EAP-Type provided by the authen-
tication server, make settings of supplicants required
by this machine.
Avoid setting to [OFF]. EAP authentication
method