Konica Minolta bizhub C754 - Manual (Page 17)

Preparing to Scan 4
TWAIN driver 4-2
– When user authentication and account track authentication are
configured on the MFP (multifunction printer) side, various
authentication dialog boxes appear. For details, see "Loading with
a Device Whose Authentication Settings Have Been Configured" on
page 8-1.
– When the MFP (multifunction printer) is configured to disable
scanner transmissions from the logged in user, the user will be
unable to scan images.
– If you select the [Use this device for future session] check box, the
"Select Devices" dialog box will not open the next time you select
the TWAIN driver, and the main window will open instead.
The main window opens.
4
Configure the settings on the [Settings] tab.
– Place: Select where the original document will be set.
– Document Mode: Select how many sides of the original document
to scan.
– Scan Size: Select the size of the original document you are
scanning.
Auto Detect :The scan size is determined automatically.
Full Image Area :The maximum scannable size is used.
SEF, LEF :"SEF" is horizontal. "LEF" is vertical.
Custom Size :You can set the scan size freely. You can register the
sizes that you set to a list and use them later.
– Color Mode: Select the color mode. You can select Black, Gray
Scale, or Full Color. If the MFP (multifunction printer) is configured
to disable the transmission of color documents for the currently
logged in user or department, the "Full Color" option does not
appear.