Konica Minolta bizhub C754 - Manual (Page 18)

Preparing to Scan 4
TWAIN driver 4-3
– Resolution: Select the scan resolution. You can select 100, 200,
300, 400, or 600 dpi. Only when you specify 100 dpi from the
TWAIN driver is the resolution on the control panel or job list of the
MFP (multifunction printer) displayed as 200 dpi.
– Scale: Expands or reduces the scan of the original document. You
can set a value in the range of 25% to 400%. If the scan size is
larger than B4 or the resolution is 600 dpi, set the value in the range
of 25% to 100%.
– Original Direction: Select the direction of the original document.
– For details about other items in the main window see, "Changing
the Settings" on page 6-1.
– Depending on the settings of image processing applications, the
main window may not be displayed. For details, see "Scanning
Using the Image Processing Application" on page 5-6.
5
Start scanning.
Select the scanning method.
– "Scanning without Checking the Document" on page 5-2
– "Checking, Adjusting, and Scanning the Document" on page 5-4