Konica Minolta bizhub C754 - Manual (Page 21)

Scanning 5
TWAIN driver 5-3
5.1.2 Starting from the MFP (Multifunction Printer)
Click [Start] on the MFP (multifunction printer) control panel to start
scanning.
Procedure
1
Select the [PUSH Scan] check box.
2
Click [Scan].
When the MFP is ready to scan, a message will appear asking you to
insert the original document.
3
Put the original document in the ADF or on the original glass.
4
On the MFP (multifunction printer) control panel, press [Start].
– If user authentication or some other authentication has been
configured, you will need to enter your user name and password on
the MFP's (multifunction printer's) control panel before you press
[Start].
The original document will be scanned, and an image of it will appear
in the image processing application.