Konica Minolta bizhub C754 - Manual (Page 16)

Preparing to Scan 4
TWAIN driver 4-1
4 Preparing to Scan
This chapter explains how to prepare to scan an original document.
2
Note
When scanner transmission is disabled on the MFP (multifunction printer)
side, you cannot use the TWAIN driver to scan an image.
Procedure
1
Start the image processing application.
2
In the image processing application, select the TWAIN driver.
– Some applications will display a "Select Devices" command.
If this is the case, before you scan an image, use "Select Devices"
to select the TWAIN driver that you want to use.
The "Select Devices" dialog box opens.
3
Select the device you want to connect to, and then click [Connect].
– You can also select the device that you want to connect to from the
list of registered devices. For details, see "Selecting from the List of
Registered Devices" on page 7-3.
– For details about the "Select Devices" dialog box, see "Selecting
the Device to Scan With" on page 7-1.