Konica Minolta bizhub 751 - Manual (Page 99)

751/601 6-9
Use Document 6
6.4 Print - Application (Public/Personal/Group user box)
6.4.1 Page Margin
A binding margin can be added to the left or right side or to the top of the printed pages.
Margin Position
Specifies the location where the binding margin is to be added.
- When [Auto] is selected, a binding margin along the long side of the paper is selected if the document
length is 11-11/16 inches (297 mm) or less. If the paper length is more than 11-11/16 inches (297 mm),
a binding margin along the short side of the paper is selected.
Adjust Value
An area with a width between 1/16 inch and 3/4 inch (0.1 mm and 20.0 mm) can be specified. To set the
binding margin to 0 inches (0 mm), touch [None].
Image Shift
When a binding margin is created, the image can be shifted according to the position of the created binding
margin. The image can be shifted between 1/16 inch and 10 inches (0.1 mm and 250.0 mm) left, right, up or
down, depending on the position of the binding margin.
!
Detail
The width of the binding margin can be specified in 1/16 inch (0.1 mm) increments.
To set the binding margin to 0 inches (0 mm), touch [No Shift].