6 basic - separate scan, 7 background removal, 8 erase – Konica Minolta bizhub 751 User Manual
Page 84: Frame erase, Basic - separate scan -8, Background removal -8, Erase -8 frame erase -8, P. 5-8
751/601
5-8
Save Document
5
5.2.6
Basic - Separate Scan
The scan operation can be divided into several sessions for various types of documents, for example, when
all pages of a document cannot be loaded into the ADF, when placing the document on the original glass, or
when single-sided documents are combined with double-sided documents. Touch [Separate Scan] to
highlight it and enable the setting.
5.2.7
Background Removal
The scanning density of the document background can be adjusted. If a scanned colored paper is too dark,
the density of the background can be adjusted.
5.2.8
Erase
An area around the edge of the document can be erased.
Frame Erase
Select this setting to specify frame erasing.
-
To erase the same width on all sides, touch [Frame], and then specify a value (range:1/16 inch to 2
inches (0.1 mm to 50.0 mm)).
-
To specify different widths for the top, left, right and bottom, touch the button for the desired location,
and then specify a value.
-
To cancel frame erasing, touch [None].