Konica Minolta bizhub C3350 - Manual (Page 32)

[Applied Functions] 1-26
1.5 Available operations in Administrator mode 1
To use [E-mail Receive (POP)]
To use [TCP Socket]
To use [LDAP]
[Certificate Verification
Settings] To verify the certificate, select items to be verified.
If you select [Enable] at each item, the certificate is verified for each item.
•
[Validity Period]: Check whether or not the certificate is within the validity
period.
[Enable] is specified by default.
• [CN]: Check whether or not CN (Common Name) of the certificate matches
the server address.
[Disable] is specified by default.
• [Chain]: Check whether or not there is any problem in the certificate chain
(certificate path). The chain is validated by referencing the external certifi-
cates that are managed on this machine.
[Disable] is specified by default.
• [Key Usage]: Check whether or not the certificate is used according to the
intended purpose approved by the certificate issuer.
[Disable] is specified by default.
• [Check CRL Expiration]: Check whether or not the certificate has expired
with CRL (Certificate Revocation List).
[Disable] is specified by default.
• [Check OCSP Expiration]: Check whether or not the certificate has expired
with the OCSP (Online Certificate Status Protocol) service.
[Disable] is specified by default.
[Device Certificate] Select the certificate to be used.
Item Description
[Protocol] [E-mail RX (POP)]
[Certificate Verification
Settings] To verify the certificate, select items to be verified.
If you select [Enable] at each item, the certificate is verified for each item.
•
[Validity Period]: Check whether or not the certificate is within the validity
period.
[Enable] is specified by default.
• [CN]: Check whether or not CN (Common Name) of the certificate matches
the server address.
[Disable] is specified by default.
• [Chain]: Check whether or not there is any problem in the certificate chain
(certificate path). The chain is validated by referencing the external certifi-
cates that are managed on this machine.
[Disable] is specified by default.
• [Key Usage]: Check whether or not the certificate is used according to the
intended purpose approved by the certificate issuer.
[Disable] is specified by default.
• [Check CRL Expiration]: Check whether or not the certificate has expired
with CRL (Certificate Revocation List).
[Disable] is specified by default.
• [Check OCSP Expiration]: Check whether or not the certificate has expired
with the OCSP (Online Certificate Status Protocol) service.
[Disable] is specified by default.
[Device Certificate] Select the certificate to be used.
Item Description
[Protocol] [TCP Socket]
[Device Certificate] Select the certificate to be used.
Item Description
[Protocol] [LDAP]
Item Description