Konica Minolta bizhub C3350 - Manual (Page 40)

[Applied Functions] 1-34
1.5 Available operations in Administrator mode 1
9
In the administrator mode, select [Security] - [IPsec] - [Communication Check], then check that a con-
nection with a peer can be established normally by the specified setting.
% Enter the peer's IP address into [IP Address], then click [Check Connection].
[Communication Type] Select a direction of IPsec communication.
[Action] Select an action to be taken for the IP packets that met [Peer], [Protocol Set-
ting], and [Communication Type].
•
[Protected]: Protect the IP packets that met the conditions.
• [Allow]: Do not protect the IP packets that met the conditions.
• [Deny]: Discard the IP packets that met the conditions.
• [Refuse]: Refuse the IP packets that met the conditions.
Item Description