Konica Minolta MSP3500 - Manual (Page 129)

4
2. Initial Settings
7-11
Misce
llane
ou
s
Chapter 7
Press the Start key to validate the setting value.
Code Print Pattern Initial Setting
d0 Year, month, day (2004.05.15) *
d1 Month day year (05 15 2004)
d2 Day month year (15 05 2004)
d3 Month, day Hours:minutes (05.15 13:45)
Year: 4 digits of dominical year
Month: 2 digits
Day: 2 digits
Hour: 2 digits (24-hour system)
Minutes: 2 digits
U7: Imprint Mode Set
Time-of-day can be corrected for the Date Print function when it becomes wrong.
1 Select U7 in the User mode.
2 When the Exposure Mode key is pressed, both the Exposure Display and Multi-Print
Display light up steadily.
In the initial condition, the year default setting is displayed.
Each time the Darker key is pressed, the lit Exposure Display moves upward to select
the currently validated setting mode in the following order: month
→ day → hours →
minutes.
Each time the Lighter key is pressed, on the other hand, the lit Exposure Display
moves downward to select a setting mode.
(Year) (Month) (Hour) (Minute) (Day)
3 In each setting mode, press the Multi-Print key to enter the setting value. Each press of
the Multi-Print key increases the setting value.
When the value exceeds the maximum setting of the selected mode, it returns to “00”
or “01” (month, day).
4 When the settings of all modes are completed, press the Start key to validate the time-
of-day setting.