Konica Minolta MSP3500 - Manual (Page 38)

3. Control Panel Keys and Indicators
2-6
Scann
er
Ch
ap
te
r 2
Output Selection Key: Select the paper feeding source according to the format of
the film image that is being reflected in the screen.
* This key is only available on the PR mode.
: when this lamp is lit:
A 90 degree image rotation is performed during
printing.
The image on the screen will be rotated 90 de-
grees. Consequently, the screen image will be
oriented horizontally on paper that is posi-
tioned lengthwise, and vertically on paper that
is positioned crosswise.
when this lamp is blink:
The Auto Film Format Select Print function is
available when Letter (or A4) size paper is
placed in both lengthwise and crosswise posi-
tions in the paper feeding tray and paper feed-
ing cassette. Paper that best suits the format of
the image on the screen will be used for print-
ing.
If you would like to use this function, please
contact the authorized dealer.
Tray: Prints the film image on paper fed from the
print tray.
Cassette1: Prints the film image on paper fed from the cas-
sette 1.
Cassette2: Prints the film image on paper fed from the cas-
sette 2. (when the Tray and Cassette1 indicators
are both lit)
Auto Skew Correction
Key: This key is used to turn the Auto Skew Correction function
ON or OFF. When this function is applied, the Auto Skew
Correction indicator will turn on and the system will cor-
rect any skew of the image during printing.
* After printing, the skew can be reset or retained. Con-
tact the authorized dealer for more information.