Konica Minolta MSP3500 - Manual (Page 132)

2. Initial Settings
7-14
Misce
llane
ou
s
Chapter 7
* To change any of the system settings described above, contact the authorized dealer.
The print
function at the
time of Toner
Empty or Toner
Cartridge Life
detection
(PR mode only)
After a toner empty condition or toner
cartridge life is detected, this function
allows you to select either to stop printing
or continue printing.
* Toner cartridge life detection is only
connected with MSP3500.
(When selected the enable print after
the Toner Catridge life fulfillment,
while depress the Start key, LED dis-
plays the toner cartridge life fulfillment
“TE”.)
Empty >>
Disable
Print Life
>> Disable
Print *
Empty >>
Enable
Print Life
>> Disable
Print
Empty >>
Enable
Print Life
>> Enable
Print
Auto Film
Format Select
print function
(PR mode only)
The Auto Format Select Print Function is
enable or disable through the control
panel. Enable * (200V)
Disable * (120V)
90 degree
rotation setting
Enables the prism to rotate the screen
image 90 degrees. Enable
Disable *
Automatic paper
source switching
(PR mode only)
Allows you to specify the paper source
when Letter or A4 size paper is loaded in
Lengthwise or Crosswise orientations into
the both paper feeding tray and paper
feeding cassette.
Auto switching: Printing continues by
automatically switching to the remaining
paper source after paper in the specified
paper source runs out.
Disabling Auto Switching: A paper empty
mode occurs and printing ceases after
paper in the specified paper source runs
out. The paper source must be refilled or
the paper source must be switched by
pressing the Output Selection Key in
order to resume printing. Auto
switching
*
Disabling
Auto
Switching
System Settings Description Selection Initial Setting