Konica Minolta Printgroove - Manual (Page 33)

Using the Printgroove POD Driver 3
Printgroove POD Driver 3-10
Module Configuration
The [Module Configuration] settings have some options that are only availa-
ble for specific Printgroove POD modules.
If [Printgroove POD Serve] is selected, the [User Name] and [Password] fields
are active. One or both these fields will need to be filled out the first time a
document is sent to Printgroove POD Serve. For more information, please
see “Transferring a Native Document” on page 3-2, Steps 10 through 13 for
details about this process.
If [Printgroove POD Queue] is selected, the [User Name] and [Password]
fields are grayed out. Nothing can be entered.
Regardless of the selected module, the [IP Address] and [Port Number] fields
are active. If you install the driver via a hyperlink from Printgroove POD Serve
or if you install the driver via the Companion CD, these fields will need to be
entered the first time the driver is used.
2
Note
By default, the Port Number value is set as follows:
443: for Printgroove POD Serve
8180: for Printgroove POD Queue