Konica Minolta Printgroove - Manual (Page 37)

Using the Print Job Editor 4
Printgroove POD Driver 4-4
4.1.1 Job Editor Setting Options
The Job Editor has seven primary setting options. The [Setting Options]
available for use depend upon the Printgroove POD module to which you are
sending the job. If an option is grayed out, it cannot be modified.
Text fields in which you can enter data, are constrained by the following lim-
its:
- Character Limits: single- and double-byte, alphanumeric characters
may be entered in any text field except the [Phone]
and [Fax] fields on the [Customer Information Set-
tings] option. These two fields may only contain num-
bers, dashes, periods.
- Illegal Characters: The following characters may not be entered into any
text field: ‘, *, \, |, :, ;, <, >, / (comma allowed)
A description of all the options, their sub-menus and the display fields fol-
lows.
2
Note
For more information about print function, refer to User’s Guide of MFP.