Konica Minolta Printgroove User Manual
Page 44
Using the Print Job Editor
4
Printgroove POD Driver
4-11
2. Perfect Binding
If the checkbox is selected, the option is active and the setting options are
displayed. If the checkbox is not selected, the setting options do not appear
in the panel. You may deselect the checkbox.
Mode Settings
Cover Print Mode
The Cover Print Mode setting for the print
job appears in the drop-down menu. You
may change the selection. All available op-
tions are selectable from the drop-down
menu.
Cover Duplex
If the checkbox is selected, the option is ac-
tive. You may deselect the checkbox.
Trim
If the checkbox is selected, the option is ac-
tive. You may deselect the checkbox.
Back Cover Settings
Spine Width
This field is only active when [Cover Print
Mode 2-in-1] or [Cover Print Mode 3-in-1] is
selected. The setting can be made in units
of 0.1 mm with the setting range between 1
to 30 mm.