Konica Minolta Printgroove - Manual (Page 9)

Introduction 1
Printgroove POD Driver 1-6
1.4 System Specifications
1.5 Additional Software Requirements
Artifex Ghostscript AFPL is installed with the driver. If Adobe Acrobat is not
available on your system, this application is used to convert your native files
to PDF.
1.6 Where to Go from Here
Use this chapter overview to help you quickly locate the Printgroove POD
Driver information you require:
Chapter Two: Installing Printgroove POD Driver
Complete procedures for installing and uninstalling the Printgroove POD
Driver are presented in this chapter. Instructions for verifying the installation
are also provided. Instructions are for both supported OSs, Windows and
Mac.
Chapter Three: Using the Printgroove POD Driver
Instructions for sending a native file to a Printgroove POD module are pro-
vided in this chapter.
Chapter Four: Using the Print Job Editor
Complete instructions for using the Print Job Editor to preview the PDF file
and modify its Job Ticket settings are provided in this chapter.
Operating System Hardware
Windows 2000 SP 4
Windows XP Professional SP 2 or
later
Windows Vista Business Edition
(32-bit) SP1 or later
Mac OS X 10.4 Tiger
Mac OS X 10.5 Leopard Processor: Pentium 4
Memory: 128 MB RAM
HDD Capacity: 570 MB free space
Display: 800 x 600
Network: 100 Mbps
(Note: these are recommended minimums only.)
Software Version
Adobe Acrobat 6.0/7.0/8/9 Standard
6.0/7.0/8 Professional
9 Pro