Konica Minolta PS7000C MKII User Manual
Page 26
Advertising
PS7000C MKII Operator’s Manual
2-4
8. Power
cord:
Connects the Scanner to the power outlet.
9. Manual switch (option):
Press this switch instead of the “SCAN” button on the
“Book Scanner” screen to start scanning.
10. USB cable:
Connects external devices to the Scanner.
11. Stopper:
Used as the reference position for the original. When
placing the original, align its top edge with this position.
12. Center mark:
Adjust the center of the original to this mark.
13. Operation panel
Displays the operation status of the Scanner, and is used to
set scanning conditions.
14. Glass plate unit (option);
Used with sheet documents that have curls or folds, and
with books to flatten the surface being scanned.
Advertising