Konica Minolta PS7000C MKII - Manual (Page 36)

PS7000C MKII Operator’s Manual
2.3 Aging - 10min
This adjustment is to stabilize the lamp and the CCD.
NOTE ! It will take time until the lamp is stable especially in the morning in
winter. In such a case, repeat the “Aging – 10min” procedure about
two times.
1 Launch the application and the PS7000C MKII TWAIN Driver.
2 Check “Adjustment” on the screen of the PS7000C MKII TWAIN Driver.
3 Select “1. Aging - 10min” on the pull-down list under “Adjustment”, and then
click “Start”.
4 Click “OK” on the confirmation screen.
5 The window indicating that adjustment is underway will appear. When the
window disappears, the adjustment is completed. Proceed to the next
adjustment, “2.4 Exposure Time”.
3-10