Konica Minolta bizhub C451 - Manual (Page 143)

3 User Operations
3-28 C550/C451
<From PageScope Web Connection>
0 For the logon procedure, see "Performing user authentication" on page 3-2.
1
Log on to the user operation mode through User Authentication from the PageScope Web Connection.
2
Click the [Box] tab and the [Open User Box] menu.
3
Enter the User Box Number and User Box Password of the target User Box and click [OK].
? What if there is a mismatch between the User Box Number and User Box Password?
% If there is a mismatch between the User Box Number and User Box Password, a message appears
that tells that authentication has not been successful. Click [OK] and perform step 3 once again.
% If the Enhanced Security Mode is set to [ON], entry of a wrong User Box Password is counted as
unauthorized access. If a wrong User Box Password is entered a predetermined number of times
(once to three times) set by the Administrator of the machine, a message appears that tells that au-
thentication has not been successful for any subsequent operation for authentication. The machine
is then set into an access lock state. To cancel the access lock state, the Administrator of the ma-
chine must perform the Release Setting. Contact the Administrator of the machine.