Konica Minolta bizhub C451 - Manual (Page 66)

C550/C451 2-51
Administrator Operations 2
Adm
inist
rat
o
r Op
era
tions
Chapter 2
5
Click the "User Box Owner is changed." check box and change the user attributes of the box.
– Clicking User List allows a account to be selected from among those registered in Account List.
– User Name can be directly entered in the Owner Name box.
– The following screen appears if the account attributes are to be changed.
– Click [Account List] to select a specific user from the registered User List.
– An account name may be directly entered in the Account Name box.
? What happens if User Box Owner is changed. is clicked?
% If the "User Box Owner is changed." check box is clicked, it clears the User Box Password. Be sure
to set the User Box Password again.
% If the "User Box Owner is changed." check box is not clicked, the changes made will not be
validated. If the changes need to be made, make sure that the "User Box Owner is changed." check
box has been clicked.
? What steps can be taken to change the User Box Type?
% To change the User Box Type, click the Type pull-down menu and select the desired box type.
? What precautions should be used when entering the Owner Name?
% Enter the User Name that has been registered through User Registration for the Owner Name.
? What precautions should be account when entering the Account Name?
% Enter the Account Name that has been registered through Account Registration for the Account
Name.
6
Click the "User Box Password is changed." check box and enter the User Box Password.
? What precautions should be used when entering the User Box Password?
% If the User Box Type has been set to [Public], enter a User Box Password that meets the
requirements of the Password Rules in the "New Password" box. For details of Password Rules,
see "Password Rules" on page 1-8.
% In the "Retype New Password" box, enter the same User Box Password as that entered in the "New
Password" box.