Konica Minolta bizhub C451 - Manual (Page 183)

4 Application Software
4-30 C550/C451
? What steps must be performed if ON (External Server) is set for the authentication method and two
or more external servers are installed?
% If [ON (External Server)] is set for the authentication method and two or more external servers are
installed, enter "@domain name" following the User Name so as to identify the specific server that
validates the user’s authentication. For details, ask the Administrator of the machine.
4
To enable Account Track, click the [Use Account Track] check box.
? What if the Hide Password check box is not selected?
% If the "Hide Password" check box is not selected, the Account Password entered is displayed as is
without being replaced by "*." Be sure to select the "Hide Password" check box for fear of someone
else sneaking a look at it.
5
Enter the Account Name and 8-to-64-digit Account Password registered with the machine.
6
Click the [OK].
2
Note
If there is a mismatch between the User Password and Account Password entered and the User Name
and Account Password registered, the specified file is erased as an error from the machine without
being printed.
If the Enhanced Security Mode is set to [ON], the entry of a wrong User Password or Account Password
is counted as unauthorized access. If a wrong User Password or Account Password is entered a
predetermined number of times (once to three times) set by the Administrator of the machine or more,
the machine is then set into an access lock state, rejecting any more logon attempts. To cancel the
access lock state, the Administrator of the machine must perform the Release Setting. Contact the
Administrator of the machine.