Konica Minolta bizhub C451 - Manual (Page 169)

4 Application Software
4-16 C550/C451
? What steps must be performed if ON (External Server) Authentication is set for the authentication
method?
% If [ON (External Server)] is set for the authentication method and two or more external servers are
installed, enter "@domain name" following the User Name so as to identify the specific server that
validates the user’s authentication. For details, ask the Administrator of the machine.
4
Click the [OK].
? What happens if a wrong User Password is entered?
% If the User Password entered does not correspond to the registered User Name, a message appears
that tells that authentication has not been successful. Click [OK] and then enter the correct User
Password.
% If the Enhanced Security Mode is set to [ON], the entry of a wrong User Password is counted as
unauthorized access. If a wrong User Password is entered a predetermined number of times (once
to three times) set by the Administrator of the machine or more, a message appears that tells that
authentication has not been successful for any subsequent operation for authentication. The ma-
chine is then set into an access lock state, rejecting any more logon attempts. To cancel the access
lock state, the Administrator of the machine must perform the Release Setting. Contact the Admin-
istrator of the machine.
% If [ON (External Server)] (Active Directory) is set for the authentication method and if user authenti-
cation is successful, the User Name not registered in the machine is automatically registered.
5
Click or double-click the desired User Box icon.
6
Type the 8-digit User Box Password.
7
Click the [OK].
– To delete a User Box, select the specific User Box icon and, from the [File] menu, select [Delete]. A
message will then appear that prompts you to confirm that you want to delete the User Box. Click
[Yes] and enter the User Box Password corresponding to the specific User Box. This deletes the
User Box.
? What happens if a wrong User Box Password is entered?
% If there is a mismatch in the User Box Password, a message appears that tells that authentication
has not been successful. Click [OK] and then enter the correct User Box Password.
% If the Enhanced Security Mode is set to [ON], the entry of a wrong User Box Password is counted
as unauthorized access. If a wrong User Box Password is entered a predetermined number of times
(once to three times) set by the Administrator of the machine or more, a message appears that tells
that authentication has not been successful for any subsequent operation for authentication. The
machine is then set into an access lock state, rejecting any more logon attempts. To cancel the ac-
cess lock state, the Administrator of the machine must perform the Release Setting. Contact the
Administrator of the machine.