Konica Minolta PageScope Box Operator - Manual (Page 10)

Introduction 1
Box Operator 1-1
1 Introduction
1.1 System requirements
In order to use Box Operator, the following software must be installed on the
computer.
-
Adobe Reader or Adobe Acrobat
- Other software required for managing and editing images
In addition, the computer must meet the following requirements.
Refer to the Readme file for the latest information about service packs and
so on.
1.2 Restrictions
Depending on the multifunctional product being used, some Box Operator
functions may not be available. For details, refer to the support information
for your multifunctional product.
A maximum of 30 computers can be connected using Box Operator to a
single multifunctional product.
Operating system Windows XP Home Edition (32bit) (SP3 or later)
Windows XP Professional (32bit) (SP3 or later)
Windows Vista Home Basic (32bit/64bit) (SP2 or later)
Windows Vista Home Premium (32bit/64bit) (SP2 or later)
Windows Vista Business (32bit/64bit) (SP2 or later)
Windows Vista Enterprise (32bit/64bit) (SP2 or later)
Windows Vista Ultimate (32bit/64bit) (SP2 or later)
Windows 7 Home Basic (32bit/64bit) (SP1 or later)
Windows 7 Home Premium (32bit/64bit) (SP1 or later)
Windows 7 Professional (32bit/64bit) (SP1 or later)
Windows 7 Enterprise (32bit/64bit) (SP1 or later)
Windows 7 Ultimate (32bit/64bit) (SP1 or later)
Windows Server 2003, Standard Edition (32bit)
Windows Server 2003, Enterprise Edition (32bit)
Windows Server 2008 Standard (32bit) (SP2 or later)
Windows Server 2008 Enterprise (32bit) (SP2 or later)
Windows Server 2008 R2 Enterprise (64bit) (SP1 or later)
Windows Server 2008 R2 Standard (64bit) (SP1 or later)
Computer PC/AT compatible machine installed with a Pentium4 1.6 GHz or
higher
Memory 256 MB or higher
Network Computer with TCP/IP protocol settings correctly specified
Hard disk 50 MB of available hard-disk space