Konica Minolta PageScope Box Operator - Manual (Page 39)

Managing Boxes 5
Box Operator 5-6
5.3 Changing the Name of the Box
Perform any of the following operations to change the name of the box.
-
Select the icon for the box to be renamed, and then click [Rename] on the
[File] menu.
- Right-click the icon for the box to be renamed, and then click [Rename].
2
Note
The name of an open box cannot be changed. In addition, the Memory
RX User Box cannot be renamed.
To change the name of a box by using a command on the [File] menu
Before changing the name of a box, check for the following.
0 The password is available for the box to be renamed.
1
Select the icon for the box to be renamed.
2
On the [File] menu, click [Rename].
The Rename user box dialog box appears.
3
In the "Name" box, type the name of the box.
– A maximum of 20 characters can be entered.
4
Click [OK].
– If a password has been specified for the box, the Password
confirmation dialog box appears. Type in the password for the box,
and then click [OK].
The name of the box is changed.