Konica Minolta PageScope Box Operator - Manual (Page 18)

Connecting to the Multifunctional Product 4
Box Operator 4-1
4 Connecting to the Multifunctional
Product
To connect to a multifunctional product
Start up Box Operator, and then display the data in the box on the connected
device.
This procedure describes the operation when the Box Operator is first
started.
1
In the [Start] menu, point to [KONICA MINOLTA], then [PageScope Box
Operator], and then click [PageScope Box Operator].
– For detailed descriptions of the main window, refer to “Explore
Window Settings” on page 3-1.
– If a multifunctional product is already registered, select the
multifunctional product to be connected to. Continue with step 6.
The software starts up and the main window appears.