5 disconnecting from a multifunctional product, Disconnecting from a multifunctional product -12 – Konica Minolta PageScope Box Operator User Manual
Page 29
Advertising
Connecting to the Multifunctional Product
4
Box Operator
4-12
4.5
Disconnecting From a Multifunctional Product
Perform any of the following operations to cut the connection to the
connected multifunctional product.
-
Click [Close] on the [Box Operator] menu.
-
Right-click the icon for the multifunctional product, and then click [Close].
-
Click [Close] in the toolbar.
To disconnect from the multifunctional product by using a command on
the [Box Operator] menu
1
On the [Box Operator] menu, click [Close].
A message appears, requesting confirmation to cut the connection.
2
Click [Yes].
The connection to the multifunctional product is cut and the list of
displayed data is cleared.
Advertising