Konica Minolta PageScope Box Operator - Manual (Page 40)

Managing Boxes 5
Box Operator 5-7
5.4 Editing the Box Properties
The properties (detailed information) for the box can be edited.
Perform any of the following operations to change the properties for the box.
-
Select the icon for the box whose properties are to be changed, and then
click [Property] on the [File] menu.
- Right-click the icon for the box whose properties are to be changed, and
then click [Property].
2
Note
The properties of an open box cannot be changed. In addition, the
properties of the Memory RX User Box cannot be changed.
To change the properties of a box by using a command on the [File]
menu
Before changing the properties of a box, check for the following.
0 The password is available for the box whose properties are to be
changed.
1
Select the icon for the box whose properties are to be changed.
2
On the [File] menu, click [Properties].
The following dialog box appears.