Restrict user access, Expert adjustment, Restrict user access] -4 [expert adjustment] -4 – Konica Minolta bizhub 4050 User Manual

Page 33

Advertising
background image

5.1

[System Settings]

5

[Description of Utility Keys]

5-4

[Restrict User Access]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Restrict User Access]

Configure a setting to restrict user's change or deletion operations.

[Expert Adjustment]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment]

Correct a defective print image.

Settings

Description

[Restrict Access to Job
Settings]

Specify items that cannot be changed by the user.

[Delete Other User
Jobs]

Select whether or not to allow the user to delete other user jobs if user authen-
tication is used on this machine.
If [Allow] is selected, you can delete other user jobs on the [Job List] screen.
[Restrict] is specified by default.

[Registering and
Changing Addr.]

Select whether or not to allow the user to register or change destinations.
[Allow] is specified by default.

[Restrict Operation]

Specify items for which access is restricted.

[Restrict Broadcast-
ing]

Select whether or not to prohibit the user from sending faxes to multiple des-
tinations. To prohibit broadcast, select [Yes].
[OFF] is specified by default.

Settings

Description

[Printer Adjustment]

Adjust the print start position and defective print images.

[Leading Edge Ad-
justment]

Select the type of paper (plain paper, thick paper, or envelope) for adjusting the
print position. Adjust the print start position at the leading edge of the paper
relative to the paper discharge direction for each paper type.
[0.0 mm] is specified by default.

[Centering]

Select the paper tray for adjusting the print position. Adjust the print start po-
sition at the left-hand edge of the paper relative to the paper discharge direc-
tion for each paper tray.
[0.0 mm] is specified by default.

[Leading Edge Ad-
justment (Duplex
Side 2)]

Select the type of paper (plain paper) for adjusting the print position. Adjust the
print start position at the leading edge of the back side of the paper relative to
the paper discharge direction for printing the back side during 2-sided printing,
for each paper type.
[0.0 mm] is specified by default.

[Centering (Duplex
Side 2)]

Select the paper tray for adjusting the print position. Adjust the print start po-
sition at the left-hand edge of the paper relative to the paper discharge direc-
tion for printing the back side during 2-sided printing, for each paper tray.
[0.0 mm] is specified by default.

[Density Adjustment] -
[Thick/1200dpi]

Adjust the image density when printing on thick paper or at 1200 dpi.
The larger the number, the darker the background.
[0] is specified by default.

[Monochrome Density
Adj.]

Adjust the density of an image to be printed in black and white.
The larger the number, the darker the background.
[0] is specified by default.

[List Output]

Print error log information or halftone patterns.

[Event Log]

Print event logs such as error logs or consumable replacement histories.

[Halftone 64]

Print a halftone pattern with a density of 25%.

[Halftone 128]

Print a halftone pattern with a density of 50%.

[Halftone 256]

Print a halftone pattern with a density of 100%.

[Gradation]

Print a gradation pattern.

[Life]

Configure a setting to replace consumables.

Advertising
This manual is related to the following products: