Detail settings, Ieee802.1x authentication settings – Konica Minolta bizhub 4050 User Manual
Page 44
[Description of Utility Keys]
5-15
5.5
[Network Settings]
5
[Detail Settings]
To display: [Utility] - [Administrator Settings] - [Network Settings] - [Detail Settings]
Configure the detailed network settings.
[IEEE802.1x Authentication Settings]
To display: [Utility] - [Administrator Settings] - [Network Settings] - [IEEE802.1x Authentication Settings]
Select whether or not to use IEEE802.1X authentication.
To configure the IEEE802.1X detailed setting, use Web Connection. For details, refer to Chapter 1 "Using
Web Connection" in [User's Guide: Applied Functions].
[Disable] is specified by default.
Settings
Description
[Device Setting]
Specify the network speed.
[Network Speed]
Select the network speed according to your environment. Selecting [Auto] en-
ables communication in all network environments.
[100Mbps Half Duplex] is specified by default.
[SLP Setting]
Select whether or not to enable SLP (Service Location Protocol).
[Enable] is specified by default.