Konica Minolta bizhub 4050 - Manual (Page 25)

4.4 [Scan/Fax Settings] 4
[Description of Utility Keys] 4-7
4.4 [Scan/Fax Settings]
[JPEG Compression Level]
To display: [Utility] - [User Settings] - [Scan/Fax Settings] - [JPEG Compression Level]
Select the default compression method from [High Quality], [Standard] and [High Compression] for transmis-
sion in color.
Data size is the largest in [High Quality] and the lowest in [High Compression].
[Standard] is specified by default.
Tips
A fax cannot be sent in color using the fax function.
[Black Compression Level]
To display: [Utility] - [User Settings] - [Scan/Fax Settings] - [Black Compression Level]
Select the default compression method from [MH] and [MMR] for transmission in black-and-white.
[MMR] is specified by default.
[Default Fax Settings]
To display: [Utility] - [User Settings] - [Scan/Fax Settings] - [Default Fax Settings]
Change the default settings (settings when the power is turned on, and the Reset is pressed) in Fax mode.
You can change the setting by selecting [Current Setting] after settings in Fax mode have been changed.
[Factory Default] is specified by default.
[Default Scan Settings]
To display: [Utility] - [User Settings] - [Scan/Fax Settings] - [Default Scan Settings]
Change the default settings (settings when the power is turned on, and the Reset is pressed) in Scan to E-
mail or Scan to Folder mode.
You can change the setting by selecting [Current Setting] after settings in Scan to E-mail or Scan to Folder
mode have been changed.
[Factory Default] is specified by default.
[Compact PDF Compression Level]
To display: [Utility] - [User Settings] - [Scan/Fax Settings] - [Compact PDF Compression Level]
Select the compression level to save a file in the Compact PDF format from [High Quality] or [High Compres-
sion].
[High Quality] is selected by default.
[Print Reports]
To display: [Utility] - [User Settings] - [Scan/Fax Settings] - [Print Reports]
Print TX Report and RX Report.
Settings Description
[TX Report] Prints a report that contains transmission results.
[Do not print] is specified by default.
[RX Report] Prints a report that contains receiving results.
[Do not print] is specified by default.