Usb timeout, Usb timeout] -19 – Konica Minolta bizhub 4050 User Manual
Page 48
[Description of Utility Keys]
5-19
5.7
[Printer Settings]
5
[USB Timeout]
To display: [Utility] - [Administrator Settings] - [Printer Settings] - [USB Timeout]
When this machine is connected via a USB device to the computer, change the communication time-out
time, if necessary.
[60 sec.] is specified by default.
[CR/LF Mapping]
Select whether or not to replace the line feed codes when printing text data.
When you want to replace the line feed codes, select the replacement method.
[OFF] is specified by default.
[Line/Page]
Enter the number of lines of text data to be printed on one page.
The default value depends on the region the machine is used in.
[Font Setting]
Configure font settings for PCL.
•
[Font Number]: Specify the default font. The displayed font number corre-
sponds to the PCL font list. [0] is specified by default.
•
[Pitch Size]: Specify the font pitch size. This option is available when [Font
Number] is set to 0 to 5. [10.00 pitch] is specified by default.
•
[Point Size]: Specify the font pitch size. This option is available when [Font
Number] is set to 6 to 102. [12.00 points] is specified by default.
•
[Symbol Set]: Select the font symbol set to be used. [PC8] is specified by
default.
[Barcode Font Set-
tings]
Configure the bar code font settings.
•
[Line Width]: Specify the line width for bar code font. [0] is specified by de-
fault.
•
[Space Width]: Specify the space width for bar code font. [0] is specified by
default.
[XPS/OOXML Setting]
Specify whether or not to perform the verification of a digital signature or print-
ing of error information when directly printing an XPS or OOXML (docx, xlsx,
or pptx) file.
[Verify XPS/OOXML
Digital Signature]
Select whether or not to verify a digital signature when printing an XPS or
OOXML (docx, xlsx, or pptx) file with a digital signature added.
When [ON] is selected, the data is not printed if the signature is invalid.
[OFF] is specified by default.
[Print XPS/OOXML
Errors]
Select whether or not to print error information when an error occurs while
printing an XPS or OOXML (docx, xlsx, or pptx) file.
[Print] is specified by default.
Settings
Description