Pbx connection settings, Report settings, Pbx connection settings] -24 [report settings] -24 – Konica Minolta bizhub 4050 User Manual
Page 53
5.8
[Fax Settings]
5
[Description of Utility Keys]
5-24
[PBX Connection Settings]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [PBX Connection Settings]
Select whether or not to connect this machine to a Private Branch Exchange (PBX) environment.
When connecting to a Private Branch Exchange (PBX) environment, enter the outside line number.
[OFF] is specified by default.
Tips
When this machine is connected to a Private Branch Exchange (PBX) environment, you can issue an outgoing
call to the outside without using [PBX Connection Settings]. In this case, type in P (pause) and recipient's
telephone number following the outside line number (number to connect from PBX to the outside).
[Report Settings]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings]
Specify the conditions for printing fax-related reports.
[Enable Settings]
Select whether or not to use the TSI Routing function.
[OFF] is specified by default.
[Print After Receive]
Select whether or not to print a received fax after it has been received.
[NO] is specified by default.
[TSI User Box Reg-
istration]
Register forwarding destinations for each sender's fax number (TSI). Select a
desired registration number, then tap [Edit].
•
[Sender (TSI)]: Specify a sender's fax number.
•
[Forwarding Destination]: Tap the list icon, then select the desired destina-
tion (SMB, FTP, or E-mail (Internet fax) destination).
[Action when TSI
User Box is not set.]
Select the action to be taken by the machine if a fax number (TSI) is not regis-
tered and no forwarding destination is received.
•
[Automatically Print]: Prints a received fax without saving it in a box.
•
[Memory RX User Box]: Saves received documents in Memory RX User
Box.
[Automatically Print] is specified by default.
[Nighttime RX Settings]
Configure the settings for using the Night RX function.
[Night Fax RX Print]
Select whether or not to use the Night RX function.
[OFF] is specified by default.
[Night RX Start
Time]
Enter the starting time of the nighttime zone.
[00:00] is specified by default.
[Night RX End Time]
Enter the ending time of the nighttime zone.
[00:00] is specified by default.
Settings
Description
Settings
Description
[Activity Report]
Specify the method to print a report (activity report) that contains results of fax-
es sent and received.