Konica Minolta BIZHUB PRO 1050 User Manual
Page 12
Installing the Printer Driver
4
4-3
✎
Reference
To detect the printers and MFPs again, click the [Update List]
button.
If the settings for the search conditions are changed, printers and
MFPs will be detected according to the new conditions. For details
on changing the settings for the search conditions, refer to
“Changing the Search Conditions To Search for Printers and
MFPs” on page 5-3.
“Installing Multiple Printers and MFPs Simultaneously” on
page 5-2
“Changing the Search Conditions To Search for Printers and
MFPs” on page 5-3
“Changing the IP Address of a Printer or MFP Assigned a
Temporary Address” on page 5-8
3
Check the installation details. If the installation details are correct, click
the [Install] button.
The installation is performed.
During installation, the progress status is displayed.
To quit the installation, click the [Cancel] button. When the message
“Cancel Installations?” appears, click the [Yes] button to quit the
installation, or click the [No] button to continue the installation.
✎
Note
When performing the installation in Windows NT4.0 for printers
and MFPs to be connected directly to the network using the TCP/
IP protocol and the Add LPR Compatible Printer dialog box
appears, click the [OK] button.