Konica Minolta BIZHUB PRO 1050 - Manual (Page 23)

5 Advanced Installation Settings
5-8
5.5 Changing the IP Address of a Printer or MFP
Assigned a Temporary Address
If the detected printer and MFP was assigned a temporary address with
AutoIP, specify the subnet mask, default gateway, and the IP address of
the printer or MFP.
✎
Note
This method is not supported by some printers and MFPs.
Operating procedure
1 In the list on the STEP 2/4 dialog box, select the printer or MFP
assigned a temporary address, and then click the [IP Address Setting]
button.