Konica Minolta bizhub 20 - Manual (Page 137)

128
Replace Parts
PF kit 2
It is time to replace the paper
feeding kit for Tray 2. Call your KONICA MINOLTA dealer to
replace the PF Kit 2.
Replace Toner The toner cartridge is at the end
of its life and printing is not
possible. Replace the empty toner cartridge with a
new one. (See Replacing a toner cartridge
on page 143.)
Scan Unable XX The machine has a mechanical
problem. Disconnect the machine from the power for
several minutes, then reconnect it. (The
machine can be turned off for up to 60 hours
without losing faxes stored in the memory.
See Transferring your faxes or Fax Journal
report on page 129.)
Document is too long for duplex
scanning. Press Stop/Exit. Use the suitable size of
paper for duplex scanning. (See Scan
on page 178.)
Scanner Locked The scanner lock is locked. Open the document cover, and then release
the scanner lock lever.
Press Stop/Exit.
Size mismatch The paper in the tray is not the
correct size. Load the correct size of paper in the tray and
set the “Paper Size” (Menu, 1, 2, 2 (See
Paper Size on page 20).
Toner Low If the LCD shows Toner Low,
you can still print; however, the
machine is telling you that the
toner cartridge is near the end of
its life and the toner will soon
need replacing. Order a new toner cartridge now.
Too Many Files There are too many files stored
on the USB Flash memory drive. Reduce the number of files stored on the
USB Flash memory drive.
Too Many Trays More than one optional tray is
installed. The maximum number of optional trays is
one. Remove any additional trays.
Unusable Device An incompatible or broken device
has been connected to the USB
direct interface. Remove the USB Flash memory drive from
the USB direct interface.
Error Message Cause Action