Konica Minolta bizhub 20 - Manual (Page 21)

Chapter 2
12
Acceptable paper and
other print media
2
Print quality may vary according to the type of
paper you are using.
You can use the following types of print
media: thin paper, plain paper, thick paper,
bond paper, recycled paper, transparencies,
labels or envelopes.
For best results, follow the instructions below:
 Use paper made for plain paper copying.
 Use paper that is 60 to 105 g/m
2
.
 Use labels and transparencies which are
designed for use in laser machines.
 DO NOT put different types of paper in the
paper tray at the same time because it
may cause paper jams or misfeeds.
 For correct printing, you must choose the
same paper size from your software
application as the paper in the tray.
 Avoid touching the printed surface of the
paper immediately after printing.
 When you use transparencies remove
each sheet immediately to prevent
smudging or paper jams.
 Use long grain paper with a neutral Ph
value, and a moisture content of approx.
5%.
Recommended paper and
print media
2
To get the best print quality, we suggest using
the following paper.
Type and size of paper
2
The machine loads paper from the installed
standard paper tray, optional lower tray or
multi-purpose tray.
Standard paper tray
2
Since the standard paper tray is a universal
type, you can use any of the paper sizes (one
paper type and size at a time) listed in the
table in Paper capacity of the paper trays
on page 13. The standard paper tray can
hold up to 250 sheets of Letter/A4 size paper
(80 g/m
2
). Paper can be loaded up to the
maximum paper mark on the sliding paper
width guide.
Multi-purpose tray (MP tray)
2
The MP tray can hold up to 50 sheets of plain
paper (80 g/m
2
) or up to 3 envelopes. Paper
can be loaded up to the maximum paper mark
on the sliding paper width guide.
Paper Type Item
Plain paper
Xerox Premier TCF 80 g/m 2
Xerox Business 80 g/m
2
Recycled Paper
Xerox Recycled Supreme
80 g/m
2
Transparency 3M CG3300
Labels Avery laser label L7 163
Envelope Antalis River series (DL)