Konica Minolta bizhub 20 - Manual (Page 35)

Chapter 4
26
Changing the password for
the administrator
4
a
Press Menu, 1, 8, 1.
b
Press a or b to choose Set Password.
Press OK.
c
Enter the registered four-digit password.
Press OK.
d
Enter a four-digit number for the new
password.
Press OK.
e
If the LCD shows Verify:re-enter the
new password.
Press OK.
f
Press Stop/Exit.
Setting up the public user
mode
4
Public user mode restricts the functions that
are available for Public users. Public users do
not need to enter a password to access the
features made available through this setting.
You can set up one Public user.
a
Press Menu, 1, 8, 1.
b
Press a or b to choose Setup ID.
Press OK.
c
Enter the administrator password.
Press OK.
d
Press a or b to choose Public.
Press OK.
e
Press a or b to choose Enable or
Disable for Fax Tx.
Press OK.
After you have set Fax Tx, repeat this
step for Fax Rx, Copy, Scan,
USB Direct and PC Print.
When you have finished changing
setting, press d or c to choose Exit and
press OK.
f
Press Stop/Exit.