Konica Minolta bizhub 20 - Manual (Page 41)

32
5
How to fax
5
Entering fax mode
5
To enter fax mode press Fax, and the key will
glow blue.
Sending a single-sided fax
from the ADF
5
Using the ADF to send your faxes is the
easiest way. To cancel a fax in progress
press Stop/Exit.
a
Make sure you are in Fax mode.
b
Place your document face up in the
ADF.
c
Dial the fax number. (See How to dial
on page 53.)
d
Press Start.
The machine scans the pages into
memory and then sends the document.
Note
If the Out of Memory message
appears while scanning a document into
memory, press Stop/Exit to cancel or
Start to send the scanned pages.
Sending a 2-sided fax from
the ADF
5
You can send a 2-sided document from the
ADF. To cancel a fax in progress press
Stop/Exit.
a
Make sure you are in Fax mode.
b
Place your document in the ADF.
c
Press Duplex.
d
Dial the fax number. (See How to dial
on page 53.)
e
Press Start.
The machine will now scan and send your
document.
Note
• Legal size 2-sided documents cannot be
faxed from the ADF.
• When the machine is ready to scan a
2-sided document, the LCD shows for
Duplex in the lower right corner.
Sending a fax
5