Konica Minolta bizhub 20 - Manual (Page 71)

Chapter 9
62
IMPORTANT
If you choose Backup Print On, the
machine will also print the fax at your
machine so you will have a copy. This is a
safety feature in case if there is a power
failure before the fax is forwarded or a
problem at the receiving machine. The
machine can store faxes for up to 60 hours
if there is a power failure.
Note
• Before you can set up PC Fax Receive
you must install the Multi-Function Suite
software on your PC. Make sure your PC
is connected and turned on. (For details
see PC-FAX Receiving in the Software
User’s Guide on the CD/DVD-ROM.)
• If your machine has a problem and is
unable to print faxes in memory, you can
use this setting to transfer your faxes to a
PC. (For details, see Error and
maintenance messages on page 125.)
• PC Fax Receive is not supported in Mac
OS. (See PC Fax receiving in the
Software User’s Guide on the CD/DVD-
ROM.)
Changing Remote Fax
Options
9
If received faxes are left in your machine’s
memory when you change to another
Remote Fax Option, the LCD will ask you the
following message:
25.Remote Fax Opt
Erase All Doc?
a 1.Yes
b 2.No
Select ab or OK
25.Remote Fax Opt
Print All Fax?
a 1.Yes
b 2.No
Select ab or OK
 If you press 1, faxes in the memory will be
erased or printed before the setting
changes. If a backup copy has already
been printed it will not be printed again.
 If you press 2, faxes in the memory will not
be erased or printed and the setting will be
unchanged.
If received faxes are left in the machine’s
memory when you change to
PC Fax Receive from another remote fax
option (Fax Forward or Fax Storage),
the LCD will ask you the following message:
25.Remote Fax Opt
Send Fax to PC?
a 1.Yes
b 2.No
Select ab or OK
 If you press 1, faxes in the memory will be
sent to your PC before the setting
changes.
 If you press 2, faxes in the memory will not
be erased or transferred to your PC and
the setting will be unchanged.
or