17 sending and receiving ip address faxes, 1 tcp/ip settings, 2 ip address fax function – Konica Minolta bizhub 601 User Manual

Page 72: Sending and receiving ip address faxes -59, Tcp/ip settings -59, Ip address fax function -59

Advertising
background image

751/601

1-59

Setup items by operation

1

1.17

Sending and receiving IP address faxes

Specify settings for sending and receiving IP address faxes.

To use the IP address fax function, this machine must be equipped with an optional fax kit,a hard disk and
an image controller. In order to use the IP address fax function, setting by a service engineer is required. For
details, contact your service representative.

The IP address fax enables communication on the IP network. Specify the host name or IP address for the
destination to send a Fax. SMTP protocol is used for sending and receiving faxes. Because IP address faxes
are sent and received via the SMTP server function of this machine, no SMTP server is required.

Specify the settings according to the following flowchart.

2

Note

For details on registering IP address fax addresses, refer to

"Registering or editing an address book

destination" on page 1-168

.

For details on the IP address fax operation, refer to the User’s Guide [Network Scan/Fax/Network Fax
Operations].

1.17.1

TCP/IP Settings

Specify settings to use this machine in a TCP/IP network environment.

For details, refer to

"Specifying general settings for TCP/IP-based communication" on page 1-2

.

1.17.2

IP Address Fax Function

On the Administrator Settings screen of the control panel, select [Network Settings] - [Forward] - [3 Network
Fax Setting] - [1 Network Fax Function Setting].

Specify the following setting.

2

Note

For details on displaying the Network Setting screen, refer to

"Displaying the Network Settings

screen" on page 2-2

.

TCP/IP Settings

IP Address Fax Function

SMTP TX Setting

SMTP RX Setting

Header Information

Finish

Advertising
This manual is related to the following products: