Konica Minolta bizhub 750 - Manual (Page 80)

Administrator Operations 2
750/600 2-61
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
6
Touch [OK].
? What happens if the Image Data Encryption Key entered does not
meet the requirements of the Password Rules?
% If the Image Data Encryption Key entered does not comply with the
Password Rules, a message appears that tells that the Image Data
Encryption Key entered cannot be used. Enter the correct Image
Data Encryption Key. For details of Password Rules, see “Pass-
word Rules” on page 1-11.
% To change the Image Data Encryption Key, see “Changing the Im-
age Data Encryption Key” on page 2-67.
7
To prevent entry of a wrong Image Data Encryption Key, enter the 20-
digit Image Data Encryption Key once again.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the HDD Setting screen.
8
Touch [OK].
? What if there is a mismatch in the Image Data Encryption Keys?
% If there is a mismatch in the Image Data Encryption Keys, a mes-
sage appears that tells that there is a mismatch in the Image Data
Encryption Keys. Perform steps 5 through 8 once again.
600_security_E.book 61 ページ ２００６年１２月２７日 水曜日 午前７時５０分