2 change password function, 1 performing change password, From the control panel – Konica Minolta bizhub 750 User Manual

Page 127: Change password function -8

Advertising
background image

3

User Operations

3-8

750/600

Use

r Op

er

at

ions

Chapter 3

3.2

Change Password Function

When [ON (MFP)] is set for Authentication Method of User Authentication, the
machine permits each of all users who have been authenticated through
User Authentication to change his or her User Password.

The User Password entered is displayed as “*” or “

●.”

3.2.1

Performing Change Password

2

Note

Do not leave the machine while you are in the user operation mode. If it
is absolutely necessary to leave the machine, be sure first to log off from
the user operation mode.

<From the Control Panel>

0

For the logon procedure, see “Performing user authentication” on
page 3-2.

1

Log on to the user operation mode through User Authentication from
the control panel.

2

Press the [Utility/Counter] key.

3

Touch [User Setting].

600_security_E.book 8 ページ 2006年12月27日 水曜日 午前7時50分

Advertising
This manual is related to the following products: