Recovery from malicious tampering of software – Konica Minolta bizhub 750 User Manual

Page 19

Advertising
background image

1

Security

1-12

750/600

Security

Chapter 1

Types of Data Cleared by Overwrite All Data Function

The Overwrite All Data function clears the following types of data.

Executing the Overwrite All Data Function initializes the following user setting
data, in addition to the above security-related settings. Always make sure of
this fact whenever executing Overwrite All Data.
-

Administrator Setting: “System Setting,” “Administrator / Machine Set-
ting,” “One-Touch Registration,” “User Authentication / Account Track,”
“Network Setting,” “Copy Setting,” “Printer Setting,” and “Fax Setting”

-

User Setting: “Address Book,” “User Setting,” “Copy mode,” “Scan
mode,” “Fax mode,” and “Box mode”

-

“JOB History”

Recovery from malicious tampering of software

If the software is tampered with, the machine detects illegal software and
shuts down operation. In such cases, it displays the service call “C-D501” on
its control panel. Operation is typically shut down with network connection
disabled; however, depending on the specific details of the tampering, the
operation is shut down with the connection with PageScope Web Connec-
tion being enabled. In such cases, the service call is displayed on Page-
Scope Web Connection. If the service call appears, contact the Service
Engineer. For more details, consult the Service Representative.

Types of Data Cleared

Description

User registration data

Deletes all user-related data that has been registered

Box registration data/file

Deletes all User Box-related information and files saved
in User Box

Secure Print Document ID/Password/
file

Deletes all Secure Document-related information and
files saved

Image files

• Image files saved other than Secure Print files and

User Box files

• Image files of jobs in job queue state

Destination recipient data files

Deletes all destination recipient data including e-mail
addresses and telephone numbers

HDD Lock Password

Clears the HDD Lock Password stored in the machine
and HDD.

Image Data Encryption Key

Clears the currently set Image Data Encryption Key.

Management Data Encryption Key

Clears the currently set Management Data Encryption
Key.

Administrator Password

Clears the currently set password, resetting it to the
factory setting

SNMP Password

600_security_E.book 12 ページ 2006年12月27日 水曜日 午前7時50分

Advertising
This manual is related to the following products: