3 setting the image data encryption key, Setting can be made only from the control panel – Konica Minolta bizhub 750 User Manual

Page 78

Advertising
background image

Administrator Operations

2

750/600

2-59

Ad

minist

ra

to

r Op

er

at

ions

Chapter 2

2.10.3 Setting the Image Data Encryption Key

Through the steps given below, you set encryption of image data stored in
the HDD.

2

Note

When the main power switch is turned off, then on again, wait at least 10
seconds to turn it on after turning it off. if there is no wait period between
turning the main power switch off, then on again, the machine may not
function properly.
Here is the sequence, through which the main power switch and sub
power switch are turned on and off:
Turn off the sub power switch

Turn off the main power switch

Turn

on the main power switch

Turn on the sub power switch

Do not leave the machine with the Administrator Setting mode setting
screen left shown on the display. If it is absolutely necessary to leave the
machine, be sure first to log off from the Administrator Setting mode.

<Setting can be made only from the control panel>

0

For the procedure to call the HDD Setting menu to the display, see steps
1 and 2 of “Setting the HDD Lock Password” on page 2-52.

1

Call the HDD Setting to the screen from the control panel.

2

Touch [HDD Encryption Setting].

600_security_E.book 59 ページ 2006年12月27日 水曜日 午前7時50分

Advertising
This manual is related to the following products: