Konica Minolta FK-502 - Manual (Page 153)

7 Transmission Applications
7-18 bizhub 360
Tr
ansmission
Ap
plicat
ion
s
Chapter 7
7.7 Frame Erase Transmission
2
Note
The displays are different depending on the country.
Frame Erase Transmission
Frame Erase is a function that, when transmitting a document bound in the
form of a book, does not allow transmission of dark bands that would
otherwise be reproduced in the marginal areas of the transmitted pages.
Dark bands can be reproduced when the original is a book or read with the
ADF left open. Frame erasure transmission prevents reproduction of dark
bands.
0 Specifications
Memory TX is selected automatically.
You can use both Platen glass and ADF.
The width of erasure can be set in steps of 1/16 inches (0.1 mm) in the
range of 1/16 to 2 inches (0.1 - 50 mm).
Initial setting of erasure width: 3/16 inches (5.0 mm.)
If Frame Erase are combined, the effect of frame erasure applies to the
original page format that is yet to be divided.
0 Functions incompatible
Polling RX (Normal), Polling RX (Bulletin), Long Original
1
Press [Fax] on the control panel to view the FAX screen, if it is not
already displayed.
2
Press [Scan Setting] and then press [Application].