Konica Minolta FK-502 - Manual (Page 205)

9 Polling
9-6 bizhub 360
Polling
Chapter 9
3
Press [Polling RX].
4
Press [Normal].
5
Press [OK].
– To release the setting, press [OFF].
The Comm. Setting screen will be restored.
6
Press [OK].
The FAX screen will be restored.
7
Designate the destination(s).
– See "Selecting One Destination" on page 3-19 for information
about designating the destination.
Two or more destinations can be designated.
8
Press [Start].
Your FK-502 starts to receive the document(s) set for transmission on
the destination(s) or kept reserved for polled transmission.
!
Detail
If reception fails, see "Unable to Receive" on page 4-5.