Konica Minolta FK-502 - Manual (Page 61)

3 Transmission
3-4 bizhub 360
Tr
an
sm
iss
ion
Chapter 3
5
Place the original on the machine.
– For details, see "Placing the
Original on the Machine" on
page 3-5.
6
Press [Start].
– When the Destination Check Display function is set to ON, the
Check Destination screen appears. Then, check the destination to
see if it is correct and press [TX]. Refer to page 7-53 for details.
– The machine begins to scan the original and transmission starts.
– The following screen will appear if the TX Result Report Check
screen is programmed to appear. If you want to print the TX Report,
press [Yes].
– To interrupt transmission, press [STOP].
– When it can not transmit, see page 5-2.
– If the transmission fails, TX Report is automatically output (if the TX
Report is programmed to print). For details of Report Settings, see
"Report Settings" on page 11-59.
– For more information about the TX Report, see "TX Report" on
page 12-8.