Konica Minolta FK-502 - Manual (Page 273)

11 Utility Mode
11-6 bizhub 360
Utility Mode
Ch
ap
te
r 11
11.2.4 Administrator Setting >> System Setting >> Power Save
Setting>> Entering Power Save Mode (Fax)
Set the Entering Power Save Mode (Fax). (page 11-20)
11.2.5 Administrator Setting >> System Setting >> Restrict User
Access>> Restrict Operation Setting >> Restrict Fax
Broadcasting
Transmitting the fax to multiple destinations is prohibited. (page 11-22)
11.2.6 Administrator Setting >> Fax Setting >> Header
Information
Register the Sender Name and the Fax ID. (page 11-24)
11.2.7 Administrator Setting >> Fax Setting >> Header/Footer
Position
Set the method of specifying the sender information and the reception
information. (page 11-27)
Item Description Available value
Entering Power
Save Mode
(Fax) If the [Immediately] have been selected and
it is power save mode when input signals
come, then power save mode will be re-
sumed after completion of reception. Normal
*
/ Immediately
Item Description Available value
Restrict Fax
Broadcasting Transmitting the fax to multiple destina-
tions is prohibited. ON / OFF
*
Item Description Available value
Sender Name The name registered is printed on the doc-
ument received by the other party as a
sender information. Up to 30 in characters
and symbols.
Sender Fax No. The Fax ID registered is printed on the doc-
ument received by the other party as a
sender information.
The FAX number of the machine is normally
entered. Up to 20 characters with
0 to 9, +, space, * and #
used.
Sender Name
Registration Sender Name which can be specified at the
time of transmission is registered. Up to 30 in characters
and symbols.
Item Description Available value
Header Posi-
tion
*1
Set a position in which the sender informa-
tion is printed. Inside Body Text / Out-
side Body Text
*
/ OFF