Konica Minolta FK-502 - Manual (Page 331)

11 Utility Mode
11-64 bizhub 360
Utility Mode
Ch
ap
te
r 11
11.16 Set the Multi Lines Setting
Set the items for the additional line.
2
Note
The Multi Line Setting can be set only when 2 lines are used.
Telephone Line Setting
Set the parameter for the additional line.
*
indicates factory default setting.
1
Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 11-3).
2
Press [Fax Setting].
Item Description Available value
Telephone Line Set-
ting Dialing Method Set the dialing method for
the Line 2 (additional line). PB
*
/ 10pps
Number of RX Call
Rings Set the arrival frequency
for the Line 2 (additional
line). Set the pseudo ring
back tone frequency after
the arrival until receiving is
started. 0-15 (2 times * )
Line Monitor Sound To hear the sound on the
line from the speaker at the
time of transmission with
the Line 2 (additional line),
set it to ON. ON / OFF
*
Line Monitor Sound
Volume Set the sound volume of
the speaker. 0-31 (16
*
)