Konica Minolta PageScope Enterprise Suite - Manual (Page 31)

Authentication Manager Setting 6
Account Manager 6-2
2
Reminder
- These settings can be specified by the system administrator or the
administrator. For "administrator", refer to the "Authentication Manager
User's Guide".
- Authentication Manager is a non-free application. You need to purchase
a license and register it on Enterprise Suite before using. For details on
license registration, refer to the "Device Manager User's Guide".
Select Target Device
2
Note
When the "Select" check box is not selected while "Device Status" is not
set to [Target], the device will not be managed by Authentication
Manager.
To specify the device as a device to be managed by Authentication
Manager, device licenses are required. Even if a new device is searched
for or added, it is not managed automatically by Authentication Manager.
If a new device is added, select the "Select" check box in this window to
register it as a device to be managed by Authentication Manager.
1
Select [Initial Settings] - [Device Management].
2
Select the device group to be displayed from the [Device Group] drop-
down list.
– Select a target column from the drop-down list, type in the text to
be searched for in the text box, and then click the [Display] button
to narrow down data to be displayed.
– To display all devices, select "All Devices".
– If master and subordinate relationships are set to the group, select
the "All subgroup" check box to display all devices, including those
in subordinate groups.